Part Number Thread for L300

I ordered a fuel filter per the part numbers in the thread, but ended up the wrong size, anyone have a link to one they've purchased in the past?

mechanic also recommended a new fuel sensor at the same time. Any thoughts?
 
Cole Wilson said:
I ordered a fuel filter per the part numbers in the thread, but ended up the wrong size, anyone have a link to one they've purchased in the past?

mechanic also recommended a new fuel sensor at the same time. Any thoughts?
Click to expand...
Which filter did you buy? I haven't noticed one being wrong and there's a chance your filter mount/primer was replaced at some point.
Any filter that interchanges with part #MB220900 should fit. Napa 3128, Wix 33128, Fram PS4886, etc.

I don't replace things "just in case" unless it's a critical service part (timing belt) or something thats reasonably cheap and just easier to do while I'm already in there (i.e. water pump w/ timing belt)... the water sensor is rather low on my list given that it's not critical, readily available, nor particularly cheap.
 
Just an update, the UJ450 did NOT fit...

The rear U-Joints for my 93 L300 that fit was MOOG 399 (from Advance). It also looked like the FEBEST ASM-91 from Amazon was a perfect fit (and cheaper) but it arrived too late. According to Advance, the MOOG fits the 1990 Mitsubishi Van, so it kinda makes sense.
 
the deli got in a little scuffle with a newer, lesser vehicle of japanese origin.

As a result, I need a couple minor things:

front sway bar links
left outer tie rod end

any tips?
 
Cole Wilson said:
the deli got in a little scuffle with a newer, lesser vehicle of japanese origin.

As a result, I need a couple minor things:

front sway bar links
left outer tie rod end

any tips?
Click to expand...
double check yours with mitsubishi.epc-data.com
Tie Rod End: Pedders TE 715R
Sway Bar Link Kit MB598097 x2 (bolt, nut, washers, bushings. Need 2)
 
Last edited:
My excel doc of parts says:
TIE ROD MR455426
TIE ROD END MB527650

Also, I miss-typed. PEDDERS TE 715R is for the tie rod end
 
Hi.. I decided to repost this parts list as the original one had a message saying..." This message is awaiting moderator approval, and is invisible to normal visitors." This message has been at the top of the post for almost a month.. Your mods must be very busy...LOL...



This is a copy of the L300 PARTS list from the Australian Delica Club..... www.delicaclub.com.....

L300

Rear Tail Shaft Uni-joint
HARDY SPICER RU J2045

Thermostat 2.5
MD 997606

Tie rod ends
Pedders TE 715R

L300 t/belt kit
DAYCO KTBA-080

Mitsy coolant
AW 351828

Alternator Belt
MD313 660
Dayco 11A 1105

Valve Timing Belt
MD134 377
Dayco 94019 94012

Engine Sump Gaskets
HC382EZ

EGR pipe gasket (MANIFOLD)
MR161679

EGR gasket inlet
MD300522

Turbo charger exhaust
MD050072
& MD050079

Turbo-charger oil return tube Gasket.
MR258477

Turbo charger oil feed line
MD094735

Turbo charger oil return-hose
MD12433

Power Steering Belt
MD 180581
Dayco 13A 0750

Air Con Belt
MB 272652
Dayco 13A 0935

Air Filter
MD 603446
HDA 5886 (or RYCO HDA 5866)
K&N E-4810

Fuel Filter
MB 220900
Z304

Oil Filter
MD 069782
Z313

Shock Absorbers Front
KYB 344111 or 344113
Bilstein F B46-1332
Ironman 12082GR or 24082FE
KYB (L300 Delica ONLY): 344111 or 444090
Gabriel GAS RYDER LT G63418 or 77418
Pro-Comp: 313515 or 913515
Tough Dog: BD2058T or FC42058B
Dobinson: GS43-082
Oztec: 60661
Ultima: 360350 or 400350L
Protex/ATAP : S2009

Shock Absorbers Rear
KYB (L300 Delica ONLY): 343226 or 443224 or 344226
Tough Dog: BD1386T or FC41386
Oztec: 60094
Pro-Comp: 319520 or 919520
Ultima: 360235
Bilstein B46-1467
Ironman 12076GR

Rear Shocks (2" lift)
Ironman: 12648GR or 24648FE
Tough Dog: BD1400T or FC41400 or BM401400

Torsion Bars (971mm length, 26mm diametre)
Pedders: H/Duty 4704
Tough Dog: 4WTB-300
Dobinsons : TB43-300 (H/Duty)

Rear Leaf Spring (2" Lift)
Dobinsons : MIT-018-R
Ironman : MITS018A

Rear Leaf Shackle Bush Kit
Dobinsons : PB43-1079K
Ironman : 715TUK

Rear Leaf Shackles (Greaseable)
Dobinsons : SK43-037
Ironman - 795

Rear Leaf Ubolt
Dobinsons - UB43-671K
Ironman : 451UBK

Ball Joints - (2.4L)
Lower BJ275
Upper Right BJ277
Upper Left BJ278

Air Lockers
ARB RD 25[/b]


If you are after parts they are available from www.delicapartsbrisbane.com.au ... He ships parts world wide however be aware than airlines will not fly gas shocks !!!! Cheers...
 
Can anyone please help me with the Rear Stabilizer Bar End Links? Looks like they may compatible with some Outlander, Lancer and Diamante, but I am not certain. Thanks!
 
Glow plugs for later 12v system (1993.05.01 - 1997.08.03)

OEM part number is MD197511
NGK CY57 is cross-referenced and successfully installed in my 1993.11 van. No data yet on long-term reliability, but they fit and run fine.
 
Rear Shocks: Monroe 37074 or Monroe 59317 or Air Shocks MA708
Front Shocks: Napa Response 32066 or Monroe 37072
Lift Support: Monroe ML4378 (Not Confirmed but dimensionally works via specs)
 
The plastic retainer clip that holds spring tension for my Crystal Lite shade is busted. Upon scouring Mega/Amayama/EPC I’ve not yet found it.

Any clue if I can replace the black part only?

Although my motors and 3/4 of the shades function, I’m tempted to scrap the whole system in lieu of self-placed shades, more headroom, and a whole lot less rattling.
 

Attachments

  • FCD891A4-EFDB-42F1-9F48-BA60018688A6.jpeg
    FCD891A4-EFDB-42F1-9F48-BA60018688A6.jpeg
    111.2 KB · Views: 34
Outer CV boot Febest part#? I ordered the Febest BT-UN which is cross-referenced with the OEM part #MB526274 but the dimensions don't seem to be correct. This is also the boot that comes up on the Febest application page for the Delica P25W. It has the right length and hub-side I.D., but the axle I.D. is only 20mm and the axle is 30mm. Anyone familiar with this?
 
Shoolur said:
Any luck on those rear stabilizer bar end links?
Click to expand...

I ended up cross/cross/cross referencing and somehow arrived at Moog K9545, which I bought on Amazon. In addition to being greaseable, they are slightly longer and much more heavy duty steel Howewever, they have the correct orientation and went on fine. Have not noticed any performance issues.
 
Hi All! Im new to finding parts and have a few questions.

I'm looking for part numbers for these:
1. Water Pump and Timing Belt Kit (35 series)
2. Injection Pump Seal Kit
3. Thermostat

I found all these at http://www.ccautos.ca for the 4D56 and am wondering if they will work for a Delica L300 Starwagon? Are these the same? Sorry if this is a naive question or if I overlooked this already being covered in the thread. I really appreciate the help!
 
You must log in or register to reply here.
Top