kbrown934's latest activity

I do not recall what forms are required. I was so relieved at the total lack of interest in my import I was very quiet waiting for the...

It is legal now. I also bought mine in Victoria BC. I stored it there for a year until it turned 25 then drove it into US at Bellingham...

I have the locker installed in diff and van is reassembled and driveable. Currently I am installing the air compressor. Once compressor...

Thanks for the explanation. I am starting to believe this transfer case is better than its successor. No ECM is appreciated in my book...

Generally in this kind of system an ECM provides the grounds to activate the solenoids. This is how electronic fuel injectors work also...

While watching my engine run from underneath crank pulley I now see that your fan damage can easily be caused by crank pulley out of...

I just rechecked my belt tension, it is that new. I am currently using a NAPA XL 25-7355 belt on my AC. It's spec 10mm x 919 OC.

if the AC belt was loose or does not fit pulley groove well it can overheat and break. I have been through a lot of belts trying to find...

Lukas Prince of Darkness. I am old too. My kid found a can on a website "Smoke to refill your Lukas wiring".

How many miles on your engine. I wonder what contributes more to failure, old materials (the bonding agent in pulley) or mileage, how...

These vans are OLD, the refrigerant system is having strokes. Black o rings not as good of a material as newer green O rings made of...

Looks too high relative to water pump center to be contacting crank pulley. Bearing number is usually stamped on bearing. here is utube...

Remove the idler pulley from adjuster bracket. 14mm nut. Check the bearing. If it is not smoot and tight replace it. they press out and...

goes without saying they do nice work.

Prusa makes nice units.