Mr_Flbble's latest activity

Thanks so much!

I do not recall what forms are required. I was so relieved at the total lack of interest in my import I was very quiet waiting for the...

I was thinking more and more about this, and I bet you could take flexible Color LED panel arrays and put them in there. Don't need to...

Thats the plan, I just have to get it fully road worthy. I did not take good care of it for those 2 years, took it on a lot of BC Forest...

It is legal now. I also bought mine in Victoria BC. I stored it there for a year until it turned 25 then drove it into US at Bellingham...

Yeah, I bought it in 2010 in Victoria BC, drove it for 2 years, then moved to the US where it could not be registered/driven. Trying to...

Did you ever get around to finishing this? As my Deli has been sitting in a garage for the last 12 years I am just getting all the bits...

I've removed the link.

Someone asked and I just figured I would post the pics here for reference. The HUB Spindle tool part I used (Hacked) was purchased from...

You don't have special tool MB990954?! ;-) It seems like a common enough problem that there must be some kind of tool available, but...

Some points of note: - I have a mild concern about crankcase pressure, due to the internal diameter of the nozzles. Though the internal...

I finally got an oil catch can installed. I have literally owned this can for 11 years in a box, but never got it installed until...

With this mod you don’t rewire any switches, just tap the dc positive coming in to the control board or any fused 12v hot, I chose that...

I actually have done this exact same mod.... with one exception.... I don't yet have the gauges powered. Can someone here recommend a...

I was thinking about doing something similar with a bunch of multi-colour leds. Do you have any photos of how you wired up the switches?