ProjectandInfo's latest activity

There is a 10A fuse in the harness for one of the accessory switches, but I don't remember which one offhand (fog lamps?). There is no...

You can try using a degreaser, brake cleaner or dish soap to clean the dieselkleen off the metal and then a carpet cleaner to remove the...

I should have clarified that it's not meant as a permanent switch, but a "I just want to go home switch". I'm not sure how risky this...

Hmm, that's an odd one, it must be pretty seized. As a workaround you could remove the whole caliper bracket, complete with caliper...

Finished up my ghetto-rific switch panel. Now I have some place to hide all my wires.

So down to be of the first 100 of this thread Delica put me to work !!! How many times have you removed the driver seat for engine...

Phase 1 of sound deadening almost complete. 72 sq ft laid 36 sq ft left to go Before After I have two weeks to finish this project...

Today I MacGyvered a table lamp cable with a switch directly from the fuse box to the wiper motor since the wipers didn't work. While...

I finished the sound deadening on all panels, doors and floor. First layer was posted handful of days ago and this is the second and...

Damn, so what would your top brand product be for an l300?

Getting ready to do the freeze plug heater this weekend. After looking over coolant and antifreeze threads I am still nervous to make...

As long as it’s a clean flush with deionized water you should be ok. I have done a ton of research on coolant through the years, and...