Recent content by willmadden8991

I bought one from Coombs auto in Canada for about $90 usd but it went bad shortly after. Honestly just recommend carving a channel or buying the blank plate. Much more reliable.

Does anyone have that Napa part number??

Hey guys, I’m road tripping down through Utah and noticed a a substantial (3 tablespoons on the ground when I stop) fuel leak that appears to be coming from injector 3. There’s a serious diesel smell under the hood and fuel pooled where the injector sits. Do I need to replace the washer? If so...

Me too. But it’s also possible that bleeding the injectors contributed to the fix. Thanks for the help.

Yes I did! That’s good to know.

Good idea but This hose was actSully leaking from the middle...odd.

Looks like I found the issue. I’m not sure what this hose is called but it’s definitely leaking. I replaced it and it the prob

thanks SK66, ill try to bleed them at the injectors. if there is air trapped in the IP would the problem continue to happen every time I start it? Im still not able to bleed the primer pump at the filter though so could air be getting in here?

I prefilled mine as well and have been able to start it but it takes about 10 seconds and a lot of white smoke as seen in my video.

I’m talking about the round plunger on top. It doesn’t move at all. Maybe 1/4“.

So I tried to prime the fuel primer pump, first loosening the drain plug and it was completely stiff...I couldnt get any fuel to come out the drain plug even with it completely out. Do you think this is the issue?

No i haven’t added it but I just did!

Yes that’s the guy. FYI, my shifting issue Came back and so I used a dremal to grind a slot into the solonoid. After that I’ve had no issues! Wish I did it sooner. I talked to Louie later and he said he only adjusted the kickback cable which had pulled loose out of the sheath. He didn’t do...

Hello delica genius’s, i am having issues starting my delica even after it has warmed up. I crank for about 7-10 secs before it starts with a bunch of white smoke. I recently replaced the glow plugs with 12V plugs and a manual heat switch. I had no issues for several weeks after. I noticed the...

Well I hooked everything back up and I got power... I have no idea what I did. Maybe disconnecting and reconnecting the fusable links. Or there’s something loose somewhere....