Search results

Looking back at it I can see how it would replace the current mounts. Hopfully won't be too much work, was excited to get this thing on soon.

Bought a used Jaos bullbar, but I can't figure out how to install it. It almost looks like I need to cut into my bumper to put it on. If anyone has pictures of theirs installed it would be greatly appreciated. I know I need to make a bracket to attach just below my grill but the lower bracket I...

Update: Had the Alternator replaced with a rebuilt unit, which the shops says has fixed the surging issue. Must have been dirty power to the fuel pump. That being said I didn't get any AC Voltage from a multimeter in that range of RPM. If you have problems with the alternator it may be best to...

Midas in another town installed a rebuilt Alternator less than a year ago for the previous owner, they said the would maybe warranty depending on what Alternator. Can't see any label on the Alternator, not sure if its OG or not, and I don't want to drive all the way over to them just to have...

Still missing #22 under the 4M40 heading. 13. Atmospheric pressure sensor (Inbuilt within ECU). 14. Fuel temperature sensor. 21 Engine rotation sensor (Crank angle sensor). 22 Crankshaft position (CKP) sensor fault.?? 25 Timer piston position sensor. (Within the fuel pump)

No smoke at all while driving. I think I also got the wrong descriptions for the blink codes. I've gone through some forums not really sure what codes are for a 1999 Charmix 4M40. I've been a little distracted by a Alternator issue as well, no charging at low RPM and the battery/fuel water...

Did you wire this to your door locks aswell? Looks like these thing have a lot of features. Kind of unclear what the advantages and disadvantages of the anti crank options are, not sure why you wouldn't use the voltage option, seems easiest.

What remote start did you buy?

Pin 4 and 5 seem to also be ground. I used a paper clip to jumper 1-4 before turning my key to acc.

Managed to grab the codes, but will check transmission when I get a chance. I would say it doesn't feel like its changing gears repeatedly, but that could be my lack of experience showing. It's also anytime the rpm is 2100-2300RPM I noticed, just harder to feel while accelerating. I do have...

Just bought a 1999 L400 (auto diesel). Driving it home on the Highway realized the engine starts to "surge" while cruising around 90 km/hr. Doesn't seem to do this at any other speed or while accelerating. The surging feels like the engine loosing power briefly and repeatedly , I have had a...

Linkage seems fine, but the top connection on the transfer case the portion for 4L is pretty Siezed. This doesn't really explain why the 4H won't engage still. Not sure where to go with this one.

Hey are the curtains available or just the rails? Also for those of you looking for electric shades, I fixed mine with some 3D printed parts I designed if yours are just broken in the same way, could send you some parts potentially. If you need the whole assembly however, that's a little out of...

Does anyone have any info on where these cables go and how it works. I am struggling to find anything in the shop manuals.

Yeah, i reckoned it wouldn't be an issue for a few meters of distance. Wasn't working anyhow!

Sorry reverse of that I can get into 4H not 4L. I can't find any diagram of this shifter, is there anyway there is broken linkage? I put it in for 4H and tried to drive do a turn on pavement to see if it felt like the 4wd was on, but it felt exactly like 2wd.

My Hubs don't seem to be locking. No light comes on and it overall doesn't feel like its in 4WD. While stopped and in neutral I can move the shifter into 4L, but when I begin to drive I hear no clicks or feel anything change. The shifter also won't physically shift into 4H. Not really familiar...

Update: The Roof is pretty much done, it's just a matter of insulated the roof and putting the interior together. I ended up using metal to metal epoxy to secure the new metal My process for anyone else attempting this: Used a sanding disk to find out how much rust i was dealing with. In my...

Looking for those same bumper parts above, if anyones got them

It doesn't actually seem to be related to the engine being cold, I can leave the Van off for 3 hours and it starts up super fast. I assume 3 hours is enough to be considered a cold start. When it sits longer it can take like 15 seconds of trying to get it started. The filter will probably be my...