Search results

Delo took the curtains but still have the mats

Building my girl (1991 L300) into a camper setup. Sending curtains and the rear floor mats to a good home. Yours for the price of shipping and some beer (you decide how much is fair). Located in Boise Idaho

Yikes. That is a cautionary tale. Hoping mine goes better

That is a pain. Were all three alternators OEM? And does your DC-DC start the moment you turn the key? Or was it one of the “smart” ones. Looking to wire mine up with a switch to turn it on once I’m cruising on the highway and likely will “set” my DC- DC down to 20A to be on the safe side

That does! Thank you

Ha! So it is! Should be able to figure it out from here. Thanks!

That’s badass! You don’t happen to know the exact parts/sizes you used do you?

Reviving this thread because I'm looking to put in a Chinese heater soon (the HCalory to be exact). Those of you who tapped your fuel line how did it go? Has anyone tried running a line directly into their fuel tank? I'm a bit worried about the heater sucking all the fuel out the heater like...

I have a '91 L300, working on my camper build. Putting in a Renogy 100ah LiFePO4 house battery to run a diesel heater in the winter, fan in the summer and probably just some USB charging for phone. Doubt I'll add anything more. Bought a Renogy 40A DC-DC charger off facebook and plan was to just...

Fuckin A Nenw! Thanks a bunch for the help. I think I’m on the right track now

Holy smokes this was helpful! I’ve unveiled my lack of mechanical competence. Thanks for setting me straight here. Just to verify I’m on the right track here, I will need 2x MB092749 and 1x MB526395 per wheel, correct? As far as I can tell the MB092749 is both the bearings and the race? My full...

Well after doing a bunch of calling and looking I could not find replacement bearings. According to Summit Racing (who allegedly talked to Aisin) Aisin does not sell replacement bearings for these. I ended up just ordering a new set of hubs from Summit ($103 a pop) and will follow this thread...

I have the Aisin manual hubs on my van (installed by Nomadic). An alignment shop told me my bearings are going out and they could not align until I got them replaced. A) how long should these bearings last? I probably have at most 15,000 miles on them. B) Does anyone know the part number for...

I'm getting set to replace my left (passenger's) CV axle. I had both replaced by a shop a year ago and they put in the wrong part so 4x4 hasn't been engaging. My girl is a 1991 P25W MT with manual hubs. Still not 100% which will fit so I ordered a Duralast 7901N and a MI-8106. Going to just to...

I'm looking for a LH axel for a '91 P25W MT (current one installed is too small and slips out of the diff). Getting numbers of MB526271 and MB526272 on mitsubishi.epc-data. The cardone 66-3136 lists as a replacement but is described as a RH. The shop who installed the incorrect axel (who will...

Definitely! We don’t get down to South Central much but holla if you get up to Fbx or the interior in general

I work in Fairbanks in the summer but I winter in Montana. My buddy and I both whip Delicas around Fairbanks. Driving the Alcan back up here in a couple weeks!

Pulled the original radiator from my Manual L300 P25W and replaced it with an aluminum radiator. The radiator works fine and appears to be in good shape. Does not come with cap. I just wanted to try the alleged added cooling power of the aluminum radiator. I can see some rust in the openings. I...

Hoooooly smokes GB. That is amazing. Don't think I'll be going quite that in depth.... but gosh darn thats inspiring

Thanks for the depth of research Sputnik! Gotta love this forum. Luckily the officer didn't ticket me, just warned me to get it changed. It does seem like plenty of people drive around with bike racks covering the plate too. I like the suction cup idea and may go for that. Sk66- the rack is a...