Search results

I have a 1995 5 speed manual Delica truck .The pedal keeps sticking and I have gotten the master that attaches to above the pedal and controls the clutch actuation.I removed the instrument cluster and cannot even access it - I tried lying on my side but I don't really fit trying to see how to...

So after having my engine screwed up by a now fired mechanic - DelicaUSA brought back Renat - a really good Delica mechanic .The owner wanted to make things right and as promised fixed my Delica free of charge .My Delica is now running great - timing was properly done ,tensioners replaced...

just a cruising around day - one of the most fotographed spots in brooklyn gave me a 30 second gap before the street was blocked with tourists taking a selfies again

What CST silicon oil should I use for my delica L300?I see some people on youtube using 5000 cst and some others using 10000 cst .Locally I have found 10,000cst differential oil - is that the same?

How in the hell do I get the balancer belt on?The tensioner does not go back far enough to allow the new belt to slip on over the pulleys - I tried every which way I thought possible and still can't get the fricking thing on - it is the right belt ,matched it to the old one and the spec...

Does anyone have the alignment specs for the Delica dropside truck ,I haven't been able to find it google ing.The front end is heavier duty than the Starwagon - the ball joints are different ,there are no numbered plates on the cam bolts on the control arms - I was told similar to the 92 mighty...

So back in August I was rock crawling and broke what I thought was my cv axle.It was a big snap/crunch noise right under my feet on the driverside.(RHD)I replaced the cv axle on the drivers side. I went out with some friends to the beach and 2000 feet into the sand i got stuck.Rear wheels full...

I need brake shoes and a kit that has the springs and whatever bits I will need before tearing them apart.This is my daily I can't take it apart unless I have all the parts needed before and not wtf after Thanks _PartSouq is unavailable and the shoes are Delica specific -

Looking to do my rear drum brakes after I replace the axle seals.Does anyone have a good resource for the parts as Partsouq is currently out.Epic data the parts are ridiculously over priced!Looking for the shoes and a parts kit like springs and clips that would be the usual to replace on an old...

Both of my rear axle seals are leaking - I got almost everything I need except for the snap rings.The snap rings I ordered are on back order - does anyone know the size and and is there an alternative I can order from Autozone or Oreilly's?This is the only thing holding me up from pulling...

Venturing out Christmas eve on some slushy muddy trails - then Christmas day after huge wind and rain storm came and melted 30 inches of snow and dumped another 3 inches of rain - the rivers and falls were angry!

I have a 93 Delica Exceed.I need the rear panel behind the driver that houses the rear controls.I also Need brown carpets as mine are beat.I live in New York so shipping is also a must and a deciding factor.

I need to replace my brake caliper on the front left side.I was told if I go to NAPA I can get the caliper for a Montero86-91 should be the same as the Delica.Does anyone have the part number for this?I have a 1993 exceed P35W Deisel righthand drive.I need the front left caliper.No I don't want...

Hey guys ever since i did the egr delete I barely hear the turbo spooling up.I have a snorkel and i used to hear it - now i only hear it barely on deceleration.What could cause this?stuck waste gate?Also doesn't seem to have as much pick up as it did before.Have a boost guage installed in the...

So after several surgeries and grafts with JB Weld plastic weld and a can of expandable foam - i was able to get the pod in a solid state for mounting EGR temp,Inline Water Temp,and boost glow shift guages.All of the gauges needed longer wiring and a longer boost hose which I will hunt down at...

I kept having a small leak of coolant under my Delica and when I shined a light above the engine while it was running it looked like a small leak was happening from a freezeplug or the head gasket near the thermostat housing.My silicone hose had black marks along the top and looking at the...

So the fan in front of the a/c condensor was getting noisy and then just died.How hard is it to remove and does anyone have a spare to sell me?Where are the sensors and relays located?If I pull it out I might as well put new sending unit or sensors in.Has anyone done this?I don't know where to...

the screw snapped in the bracket on my 93 and trying to drill it out i destroyed the bracket.Anyone have a complete arm,bracket and mirror?

So I am retro fitting a boost,inline temp,and egr temp guage into the original dash pod of my 93 L300.I cant seem to find any diagrams for the pin connector/ harness that connects the dash pod.I want to.know which wire is always live,keyed on and the one for the lights when the lights are turned...

Hi My A/C condenser fan is not coming on when I use my A/C so the cold air is intermitant.I checked the 3 long glass fuses behind the glove box and they are all good.Is there a fan relay or temp sensor i need to replace and where is it located.Its damn hot outside and my A/C is important!!!!