4d56

Hey guys I’m in desperate need of trying to find a AC compressor bracket for my Mitsubishi Express Diesel 2.5l 4D56 motor Nothing from the petrol motors would fit and not sure if the triton or Pajero ones would fit considering they used the same motor. It’s a 1993 model. If any one can lead me...

I just purchased my first Delica! I’m beyond excited to get this thing to 100% and adventure all over with it. 1993 Delica Starwagon Exceed 4D56 engine 187,000 Km’s On day one of driving, more like minute one, it wanted to overheat on me. After getting it back to California from Arizona, I...

Howdy everyone, I have a 1993 L300 4D56 diesel automatic Delica. I have it torn apart down to the cylinder head gasket and am ready to throw the new one in. I spent 4-5 hours getting the old RTV off of the lower and upper half of the cylinder heads. My question: Do I need to apply RTV of some...

Hello there, New to this Delica world and this week the battery got drained (a door was left open for a couple days and the lights where on inside). I can't figure out how to jump start this dual battery system. I have a portable jump started but whenever I connect the black clamp to what I...

Hey guys, this is Briggs over at Pro Auto Care and we're excited to join the forum! We've got one of the top Mitsubishi master technicians in the country working here and he's got decades of experience working on Delicas which is a massive resource for anyone looking to get their van scooting...

Hi I am new to the community and loving the l300 life. I have an old 1984 4x4 with a 1.8l that is getting very tired and I may have scored a 2wd triton to harvest a diesel engine from. I haven't seen it nor do I know what engine is in it specifically but I believe it's a 4d56 and was wondering...

Grant mentioned in a thread that the 6 speed gearbox from the diesel Hyundai H1 can fit the 4D56 on the L300. That applies to the H1's 5 speed gearbox too? Is the H1's 5 speed gearbox the same as the L300's with the 5th gear nut problem...

Hello, My 92 star wagon P25W has suffered some engine damage after all 4 glow plugs melted. There is damage to 2 of the cylinder liners and most likely at least those 2 pistons and a few valves. I have already rewired the glow plugs to bypass the malfunctioning glow plug computer, but...

1994 L200 4D56 (turbo'd) My truck kept losing water often over a period of months. As many times as I looked, I couldn't tell from where it was leaking or where it was going. My temperature gauge hasn't worked properly since I bought the truck but I could tell it was getting hot often after...

I ended up throwing a rod on my way back home on a cross country trip. As it stands she’s stuck in a shop in Nebraska. I thought about upgrading with the newer Huyndai engine. However the mechanics are hesitant on installing the same thing but a little different (even though I explained it’s the...

Hey all. New guy here. Here's my little 4d56 adventure story. I put a high-miled 4d55 into a Mazda b2600i 4x4(because I had the Mazda and it was cheap and I always wanted to do a diesel swap. See it here: https://r.tapatalk.com/shareLink/to...&share_fid=72600&share_type=t&link_source=app )...

Dear, I'm Nicola and I write from Italy. I have to rebuild a 1988 4D56 Engine . I read this post: https://delicaforum.com/index.php?threads/cylinder-heads-flush-recessed-or-protruding-valve.1286/ Now my engine has PROTRUDING HEAD and PROTRUDING PISTONS. Since I found a NON-PROTRUDING head...

Hi All. Every morning, the first start of the day my yr2000 L300 turbodiesel 4D56 takes about 4 - 6 tried to fully turn over. However this only happens once, at the beginning of the day. Each time I start my engine after I have zero issues and turn over on the first try, even if this is...

I’m looking to let go of my Delica. I picked it up from Glen and the fellas at Coombs Country Autos on Vancouver Island a couple years back. It was a replacement for my ‘68 VW, due to the fact that I needed a cross country vehicle for a while. It is registered and resides in Newport, Kentucky...