brakes

  1. MJNewell

    L400 Rear Brakes Seized - 1996

    Hey all, I am having difficulty finding replacement rear calipers. They do not seem to be as available as front calipers. I have been buying front calipers for 1996 Montero and they match perfectly. I am wondering if: a) Montero rear calipers fit/match Delica L400? b) What is a good online...
  2. delicadjjapan

    Brake Fluid Volume

    I have been looking through the forums, Delica manuals and Russek handbook and cannot find the VOLUME for how much break fluid goes back in once you have fully drained the system. Doing a full brake replace, calipers, rotors, pads, braided steel brake lines...
  3. glebez

    Load sensing proportioning valve replacement

    Hey smart folks, so my 1995 L300 (P05W) had a leaky brake cylinder in the rear on the left and brakes only worked there for 17%. I gave it to the workshop for repairs and now they are calling me, saying that they replaced the cylinder, but there's still not enough braking power. They claim the...
  4. jonsvibe

    Parking Brake Hanger

    Hey all, trying to replace my rear axle parking brake hanger which has fallen apart plus find some used brake lines if possible. Original ones didn’t get mounted in the bracket and has since bent. Rather not re-bend them. Willing to pick-up if in Portland area.
  5. meninnoa

    1991 l300 front Pad/rotor replacement

    Hey guys, this seemed like something I should be able to find a write up for and I can’t find anything. I’ve gotten as far as getting the hub bolts out and now I can’t figure out how the hubs come off. Please any help would be appreciated, feeling pretty defeated already considering I’m somewhat...
  6. jonsvibe

    (Not) Rear Disc Brake Conversion

    Well, I was scrolling through Good Karrma for some misc items and came up on this. https://delicapartsusa.com/products/good-karrma-l300-disc-brake-conversion-kit Disc brakes, holy shit. Has anyone tried this yet? Thinking of sinking the cash next month after I finish moving and fix the rust...
  7. Longball

    Lots of resistance after dual piston caliper upgrade + new U-Joints

    Hi all, I took my rig off stands last week after finally completing the dual piston caliper upgrade, including new rotors and brake pads. While I was at it I swapped out all my driveshaft U-joints and also cleaned and re-greased my front hubs. I took it out for a spin to bed in the brakes and...
  8. westcoastdelica

    Looking for knowledge on part #’s for aftermarket

    Hi all. Our van needs a new brake setup, front and rears. It’s at the shop right now In BC Canada and I’m looking for some aftermarket parts to save some $$. any part numbers or advice would be appreciated!
  9. A

    Master Cylinder Cleanup

    After replacing my master cylinder I decided to clean up the mess left in the floorboard. Don't forget to undo this retaining ring at the bottom of the steering column cover. Mine let out about 1/2oz of fluid that was trapped. How hard is it to disconnect the steering linkage to get all these...
  10. max

    Looking for Replacement Rear Drum Assembly

    Has anyone found a drum brake kit that fits the Delica? I'd like to replace everything in the assembly, but I haven't been able to find a compatible kit - is my best option at this point to order the individual components through amayama?
  11. S

    1989 L300 Pulls Left On Braking

    New-to-me '89 pulls just a tad left as I'm coming to a complete stop. If I brake from 30 MPH to 10 MPH, it tracks straight. And it tracks straight while accelerating or coasting. It's just that last 10 MPH to full stop that I get a quick pull to the left. If I look super closely at the right...
Top