Kyre
Active Member
I didn't know the DELICA logo at the rear of my Exceed was supposed to light up when the lights went on. I found this article about replacing the halogen lights, which often fail with LED. The LEDs I bought don't need as much modification and can use the original light mount, where the original post used a custom version. http://www.mdocuk.co.uk/forums/viewtopic.php?p=375344&sid=71b4a4ff4cb8bfbeff036c4825e77dcb
I bought these LED eagle eye lights from Amazon and they fit perfectly in the original lens once you remove the old bulb.
https://www.amazon.com/gp/product/B01N8XO4E3/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
It's as easy as removing the rear panel inside the door (with proper body removing tools), removing the old halogen bulb, but keep the lens as you'll need this to insert the LED, and solder the wires to the original connector. The wires are extremely thin from the LEDs but once soldered and shrink wrapped they're strong.
One thing I noticed from the original post is the actual taillights on the left and right (See last image). You'll notice mine only light up at the bottom (original post light up top and bottom), I'm assuming the top should light up as well? I removed the lens and tried another bulb but they both don't light up when the lights are turned on. Am I missing something?
I bought these LED eagle eye lights from Amazon and they fit perfectly in the original lens once you remove the old bulb.
https://www.amazon.com/gp/product/B01N8XO4E3/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
It's as easy as removing the rear panel inside the door (with proper body removing tools), removing the old halogen bulb, but keep the lens as you'll need this to insert the LED, and solder the wires to the original connector. The wires are extremely thin from the LEDs but once soldered and shrink wrapped they're strong.
One thing I noticed from the original post is the actual taillights on the left and right (See last image). You'll notice mine only light up at the bottom (original post light up top and bottom), I'm assuming the top should light up as well? I removed the lens and tried another bulb but they both don't light up when the lights are turned on. Am I missing something?