Search results

Yes. A momentary pull switch. What does it do?

1990 Super Exceed. ...its about time I figure this one out : )

I totally agree with Growler above. Everything. Be sure to torque to the correct value with the right wrench. I am convinced that the shop I purchased my Deli from did not do this. The timing sprocket fell off and the top end blew to bits. Cost me lots of money and time to put it all back...

My FTS hitch is great, but as above, the finish faded and rusted within the year. Paint before install if doing again.

Been there!!! it'll get better!

Looks like somebody's head blowed up? I hope you are on the mend? What caused the clash? Welcome.... Welcome..... welcome! HC

Thanks.... HC

I would guess the turbo may be tire at that point. If it fails parts get sucked into the motor and major damage will be done. Price out a new turbo or have the current one checked for tired bearings. Mine failed. I spent much of my early summer learning how to do big engine work.... Think about...

Get the hitch with three square tubes! You can keep a trailer mounted and still have a pivot system for bikes etc and a pivot ladder etc on the other side. Brilliant. FTS 4x4 has them.

Success! - I recalled having trouble last year when I went to wire the trailer lights, after another attempt a few days ago I recall the issue and have finally resolved it. The problem is that the tail lights of the vehicle have three separate elements and the common trailer light in the US (I...

I have a '90 Super Exceed. When I went to UHaul here in the US I was handed a strange relay black box kit but when I hooked it up (by removing a tail light and tapping in there) the results are very poor. I don't think it is the correct connection. Can I just wire direct to the tail lights? ( I...

Are there any domestic alternatives for my transmission oil cooler on my '90 Super Exceed? It started to leak enough that I pulled it and am now running (in cool weather) without it. I searched Amayama and a couple of authentic parts places and they want $400-$600 US for a factory part. I am...

Color does not matter. Vermont, USA Thanks. HC

hmmm.... this is just a piece of soft rubber pipe that drains the super hot oil from the turbo down back into the pan. No fancy fittings on either end - just hose clamps. My concern is the temp of oil dropping down from the turbocharger? must be crazy high. This pipe is only 5/8" x 4 1/4". I...

How well is your new oil pressure and temp sensor set up working? I followed your thread with Growls and I am just about to do the same set up (since I just dropped a bunch of oil after my soft flex turbo return pipe split and nearly caused a BIG fuss). Thanks in advance for your input! HC

Wow.... I had just returned from a short trip and when I stepped out of my rig I nearly landed in a puddle of expanding oil. The return pipe I had fitted on the oil drop from from the turbo to the oil pan had failed. I am very lucky to have noticed it so quickly! Especially since I had just...

I unbolted the seatbelt anchor from the A post to work on the vehicle months ago. Just left it hanging, and when I went to re install it now the mechanism is locked? Worked fine when I last drove the vehicle. Very strange. I hate to spend money on a replacement if there is some simple trick here...

I recall seeing this somewhere on the forum but going back I cannot find the answer. 1990 Super Exceed Thanks! HC

OMG.... Its the early version of the DeliBible! I've been given the keys to the vault! Thanks guys! Thank you Delicaforum! HC

I found it took me a few tries to be 100% sure I was on the exact correct teeth. Worth the time to get that correct! Also, you can leave the radiator in place, but remove the fan shroud - simple - 4 small nuts to remove.