Trailer hitch for mitsubishi delica

Not sure where you are located. Last year I found one listed on Craigslist in Canada. Took a beautiful drive over a pass and two ferries in the deli. Guy sold his, but had some extra parts. Ended up getting the hitch, spare tire with wheel, a used turbo cartridge that is rebuild able, a set of head bolts and some very good mechanic advice for 75$. Life is an adventure, sometimes you just have to see what happens.
 
Most of the importers have them... Delica USA, RightDrive, etc. I think they are all selling the FTS hitch.
 
Get the hitch with three square tubes! You can keep a trailer mounted and still have a pivot system for bikes etc and a pivot ladder etc on the other side. Brilliant. FTS 4x4 has them.
 
my l400 came with a hitch the reciever I have is 2 inch and it's a tad to big any ideas is there an alternative, or just have one made?
 
Roy Finch said:
my l400 came with a hitch the reciever I have is 2 inch and it's a tad to big any ideas is there an alternative, or just have one made?
Click to expand...
Hitches come in 2" and 1¼". If the tongue of your device that you're inserting into the hitch receiver is smaller than the receiver, then you need an adapter. Any trailer store, walmart, etc will sell adapters.
 
Sputnik said:
Hitches come in 2" and 1¼". If the tongue of your device that you're inserting into the hitch receiver is smaller than the receiver, then you need an adapter. Any trailer store, walmart, etc will sell adapters.
Click to expand...
ya this one is a tad smaller my 2 inch is just barely to big
 
Does anyone know if the L300 FTS hitch fits 1991 and older versions? The shipping info from Rising Sun mentioned 1992+, which I didn't realize when I bought it. But some people on this forum have mentioned installing the FTS hitch to older models of the L300.
 
In case anyone sees this and is curious the rising sun l300 hitch does seem to fit 1991 and earlier models, even if they specify 1992+ in their shipping info
 
I have 3 gently used take off hitches from customer delica builds. I'll fire one over to you for $200 plus shipping if you'd like
 
Kellyn said:
I have 3 gently used take off hitches from customer delica builds. I'll fire one over to you for $200 plus shipping if you'd like
Click to expand...
I am interested, I'm sure shipping is astronomical. What am I looking at for Nirth Carolina?
 
Martymannjr said:
I am interested, I'm sure shipping is astronomical. What am I looking at for Nirth Carolina?
Click to expand...
Kellyn said:
I have 3 gently used take off hitches from customer delica builds. I'll fire one over to you for $200 plus shipping if you'd like
Click to expand...
I'd love one. I'm in Central Ca and could send you a FedEx label for one if you get me the dimensions. Please advise where I can get in touch with you off this forum. Thank you!
 
Martymannjr said:
I am interested, I'm sure shipping is astronomical. What am I looking at for Nirth Carolina?
Kellyn said:
I have 3 gently used take off hitches from customer delica builds. I'll fire one over to you for $200 plus shipping if you'd like
Click to expand...

have 3 gently used take off hitches from customer delica builds. I'll fire one over to you for $200 plus shipping if you'd like-- Kellyn, I'd like one if it is still available. Please advise,
Click to expand...
 
Anyone know if these hitches will fit a 97 jb470? (Camper)
Not sure what to go off for fitment, I've read its based on the l300 p25.....
 
avit said:
Anyone know if these hitches will fit a 97 jb470? (Camper)
Not sure what to go off for fitment, I've read its based on the l300 p25.....
Click to expand...
The JB470/500 have separate frames; the post '86 L300 is unibody... the bumper/hitch mounting will be very different. They are based on the L300 Truck L039G, not an L300 Van/Wagon.
 
You must log in or register to reply here.
Top