Hyundai Parts for L300s

Sputnik

Sputnik

Well-Known Member
Because the Hyundai D4BF (and other D4B engine castings) are based on, and virtually identical to the 4D56, a lot of parts are interchangeable. There are some differences though, so this thread is an attempt to specify what part numbers will work, especially as OEM Mitsubishi stuff gets harder to source.

I'd appreciate if anyone has specific info/model numbers to list them so we can aggregate this info.

I'm also going to dig up D4BF engine diagrams and parts lists to try to clarify what's what.

So far, what I have for my late year '93 high roof P35W (and FYI, there were a few changes to the vans around mid-'93 like a water cooled turbo, that earlier models don't have, so that complicates matters a bit.)


Hyundai Parts with model numbers:

* Balance Belt tensioner 23357 42030
* Balance Belt (late model L300) 23356 42500
* Timing belt tensioner 24317 42020
* Water Pump 25100 42001
* Water Pump gasket 25124 42060

Likely fitter
* Valve Cover Gasket 22441 42000

​

 
Last edited:
12v Glow Plug Relay- HQ803830 (can also be used for 6v if wire end is changed to spade connector)
24mm Torsion Bars (HD)- left side 5415043160, right side 5416043160 (I believe now unavailable new)
22mm Torsion Bars (OEM spec)- left side 5410043420, right side 5416043420
Starter- 3610042050 (2.2Kw), 3610042011 (2Kw)
Motor Mounts- right side 2181243200, left side 2181243001
Damper Pulley (Harmonic Balancer/Crankshaft Pulley)- 2312442001

It should be noted that anything to do with the motor applies to the D4BF/4D56T
 
Last edited:
sk66 said:
Glow Plug Relay- HQ803830
24mm Torsion Bars- left side 5415043160, right side is 5416043160 (I believe unavailable new anymore)
Starter- 3610032630
Click to expand...
This is a parts diagrams for a 94 H100, which does share some components with our vans, but I'm realizing that there are zillions of regional variants on these vehicles, so not sure how useful this would actually be for us.


The actual address is here, but doesn't resolve when cut and pasted:

https://hyundai.catalogs-parts.com/#{client:e7dqgl;page:subgroup;lang:en;catalog:gen;family:h100;catalog_code:gex4409400;prm:01.1,02.d,03.x,06.g,dt.r,year.1996;group:en}
 
Sputnik said:
This is a parts diagrams for a 94 H100, which does share some components with our vans, but I'm realizing that there are zillions of regional variants on these vehicles, so not sure how useful this would actually be for us.


The actual address is here, but doesn't resolve when cut and pasted:

https://hyundai.catalogs-parts.com/#{client:e7dqgl;page:subgroup;lang:en;catalog:gen;family:h100;catalog_code:gex4409400;prm:01.1,02.d,03.x,06.g,dt.r,year.1996;group:en}
Click to expand...
This is the same, just on SpareKorea; works like EPC/Amayama.
H100 Mini Bus
 
Yo Team. I am going to be replacing the rocker assembly (shaft, arms, springs) for my 89' 4D56T. See "My Balance Belt Broke" post.

My assembly has been inspected and seems good however, I was cautioned to just go ahead and replace, so I will. I go deep, not worth an unexpected failure.

Here is the list of what I've come up with from SpareKorea. They have the rocker shaft and exhaust rocker arms in stock. The intake is out as are the springs.

Hyundai Parts ----> JDM PARTS

I know there were some changes in very late model Japan parts but it seems that up to 99' they were all the same.

Would the Hyundai parts work? They have a few different part numbers each. Its hard to know what changed, and how is different?

Thanks!
 
Last edited:
Nenw said:
Yo Team. I am going to be replacing the rocker assembly (shaft, arms, springs) for my 89' 4D56T. See "My Balance Belt Broke" post.

My assembly has been inspected and seems good however, I was cautioned to just go ahead and replace, so I will. I go deep, not worth an unexpected failure.

Here is the list of what I've come up with from SpareKorea. They have the rocker shaft and exhaust rocker arms in stock. The intake is out as are the springs.

Hyundai Parts ----> JDM PARTS

I know there were some changes in very late model Japan parts but it seems that up to 99' they were all the same.

Would the Hyundai parts work? They have a few different part numbers each. Its hard to know what changed, and how is different?

Thanks!
Click to expand...
The Hyundai 22100-42700 head is sold as a replacement for both the Hyundai and Mitsubishi 2.5D motors... (other part numbers also cross to the later engines ('99+). But I have no real idea about individual components... I can't think of any reason they shouldn't work.
 
sk66 said:
22mm Torsion Bars (OEM spec)- left side 5410043420, right side 5416043420
Click to expand...
Hi,

is it really possible to exchange the hynndai 22mm torsion bars 1:1 on a L300 4WD SWB?
I read on a German forum that the ones from Hyndai are 30 mm longer? Or just the ones from Starex?

Kind regards
 
Last edited:
midijunkie said:
Hi,

is it really possible to exchange the hynndai 22mm torsion bars 1:1 on a L300 4WD SWB?
I read on a German forum that the ones from Hyndai are 30 mm longer? Or just the ones from Starex?

Kind regards
Click to expand...
Yes, using the bars from the H100/Porter... many of us have them installed. It's quite possible the ones for the Starex are longer, they have different part numbers.
 
75A Alternator 3730042750, should fit up to mid '93 L300's. Would need pivot drilled to 10mm for later models.

download.jpg
 
Sputnik said:
Because the Hyundai D4BF (and other D4B engine castings) are based on, and virtually identical to the 4D56, a lot of parts are interchangeable. There are some differences though, so this thread is an attempt to specify what part numbers will work, especially as OEM Mitsubishi stuff gets harder to source.

I'd appreciate if anyone has specific info/model numbers to list them so we can aggregate this info.

I'm also going to dig up D4BF engine diagrams and parts lists to try to clarify what's what.

So far, what I have for my late year '93 high roof P35W (and FYI, there were a few changes to the vans around mid-'93 like a water cooled turbo, that earlier models don't have, so that complicates matters a bit.)


Hyundai Parts with model numbers:

* Balance Belt tensioner 23357 42030
* Balance Belt (late model L300) 23356 42500
* Timing belt tensioner 24317 42020
* Water Pump 25100 42001
* Water Pump gasket 25124 42060

Likely fitter
* Valve Cover Gasket 22441 42000

​

Click to expand...

I know that the timing belts changed with the move to recessed valve and a different style of teeth on the sprockets, but does anyone know if the tensioners are interchangeable with both early and late 4D56 engines, or are they specific also?
 
Last edited:
sealica said:
I know that the timing belts changed with the move to recessed valve and a different style of teeth on the sprockets, but does anyone know if the tensioners are interchangeable with both early and late 4D56 engines, or are they specific also?
Click to expand...
Pretty easy to determine with a generic EPC search (remove chassis #). For the timing belt tensioner it returns a single part # for all model years.

Screen Shot 2022-06-23 at 9.36.29 AM.png
 
Over here in the Philippines, the Hyundai Grace is virtually identical to the Delica, also in LHD although the Delica retains its Sliding door on the left hand side (when facing forwards) whilst the Grace has the sliding door on the right hand side. I am yet to see a 4WD version of the Grace - Delicas over here in 2WD have five wheel nuts and the 4WD have six - so easy to distinguish.
 
I have some oil filters (Hyundai/KIA 263304A001) that I received from sparekorea (they were a good deal while ordering another part, and appeared to be the correct part #). I'm wondering if I made a mistake ...

263304A001 crosses with 2630042010 (via partsouq), but MD069782 only crosses with 2630042010 via partsouq. On sparekorea searching for 2630042010 results in 263304A001 which led me to purchasing these filters ...

They appear to be a bit smaller than the WIX 51067 that I usually use (OEM as per my 1992 van = MD069782). I suspect they might work totally fine (threaded area looks same), but the rubber gasket appears to be a smaller outside diameter and the actual filter body dimension are: Wix is 11.5mm taller (103.51mm OD), hyundai 95.03mm OD.

Edit: No leaks or other issues ~4,000km later.
 

Attachments

  • IMG_20221205_181041_566.jpg
    IMG_20221205_181041_566.jpg
    103.3 KB · Views: 22
  • IMG_20221205_181319_689.jpg
    IMG_20221205_181319_689.jpg
    135.6 KB · Views: 22
  • IMG_20221205_181336_684~2.jpg
    IMG_20221205_181336_684~2.jpg
    130.7 KB · Views: 22
  • IMG_20221205_181540_097.jpg
    IMG_20221205_181540_097.jpg
    87.5 KB · Views: 19
Last edited:
You must log in or register to reply here.
Top