removing window switches/center console

[Shepherd]

I apologize if this has been covered elsewhere, but I couldn't find the info. I have a wonky window switch in a 1994 L-300, and I can't figure out how to remove the switch assembly from the center console. Thank you!!
Milton
Sullivan, NH

 

[jonsvibe]

I just pop a flathead along the edge and pop the thing out. The switches themselves come out with two Philips screws holding the sides underneath. I’ve cleaned the contacts inside and de-gunked it in the past and that seems to help.

 

[Sputnik]

More info here:

Power window switch repair

sorry @JohnK, I’ve had a bunch on my plate but managed to dig into this today. First thing you want to do it to pull the switch from the center console and from its own mounting plate. This requires removing two screws from behind. Easy enough. Next you want to pull up the side of the rubber...

delicaforum.com

 

[TwistedCliff]

I pulled mine out just by lifting with my fingers with a bit of pressure inside the change/junk cup. Once you pull out the switch assembly the rest of the screws are pretty self evident, but here are a few more photos of the assembly for folks.

 

[Shepherd]

I pulled mine out just by lifting with my fingers with a bit of pressure inside the change/junk cup. Once you pull out the switch assembly the rest of the screws are pretty self evident, but here are a few more photos of the assembly for folks. View attachment 21446View attachment 21447View attachment 21448

Thank you!!