sunroof seal/weatherstrip

[Alexander_Col_bog]

---ESP--
Hola a todos desde Colombia, hoy recibí la pieza MR100655 que compre en Aliexpress, mañana voy a hacre el cambio del burlete, en mi lista de actividades tengo listadas:
1.Retirar el techo de vidrio.
2. Lijar y aplicar anticorrosivo antes de poner la pieza.
3.Poner el burlete
4.Limpiar los tubos de desague.

Espero que esto funcione muy bien, les contaré y documentaré los resultados.

---EN---
Hello everyone from Colombia, today I received the part MR100655 that I bought on Aliexpress, tomorrow I am going to change the weather stripping, in my list of activities I have listed:
1.Remove the glass roof.
2. Sand and apply anticorrosive before installing the piece.
3.Put the weather stripping
4.Clean the drain pipes.

I hope this works very well, I will tell you and document the results.

 

[Nenw]

It surely can't be worse than watching it in the car wash tunnel with water just pouring inside.... with 2 more rinse cycles to go . I tried to cheat it and make my own. Like lots of things in my life, apparently I like to learn the hard way

It’s been almost 3 years, surely enough enough time to get a few rain events in San Diego. Any update on how this is holding up with those corners not sitting flat?

---EN---
Hello everyone from Colombia, today I received the part MR100655 that I bought on Aliexpress, tomorrow I am going to change the weather stripping, in my list of activities I have listed:
1.Remove the glass roof.
2. Sand and apply anticorrosive before installing the piece.
3.Put the weather stripping
4.Clean the drain pipes.

I hope this works very well, I will tell you and document the results.

Looking forward to it.