1993 L300 - AC Condenser Fan Wiring

K

kaisermhw

New Member
Hello all - '93 L300, P24W, 4G64,
When I got it, the Condenser fan was missing, I've replaced the condeser and fan with new/aftermarket... however, I don't know where the wiring from the Fan should go. I assume it should be tied to the Compressor such that when the compressor comes on, the fan comes on... anyone have any pictures you can share that will show where to wire?
Or other suggestions?

TIA
MW
 
condenser linkg https://coldhose.com/search?q=44-1420&type=product&product_cat=all
my full order - and I had them make two new hoses for me as you can see, if I recall, this was necessary due to the location of the fittings on the new condenser and new drier... the new hoses were a bit long but better safe than sorry and I made it work. my fan was missing when i got my Deli so I got a new fan from them as well.
i also had to modify the factory Condenser mount to fit the new condenser - can take pics of that if you need?

cold hose ac.pngcold hose custom hoses.png
 
Thanks so much for this. I had gas put in it yesterday and the guy said the condenser looks new (i believe its from 2020) but said the fan was barely blowing and I should get a new one. I’ll try to get this same one since my Delica is also a 93 L300 4G56

Thanks for the info!
 
There's several different options/wiring diagrams in the electrical manuals. But in this post I go over the wiring of the more common dual AC system.
 
Made the mistake of not ordering the "Core Tie Strap and Clip Mount Kit"... I didn't read properly (my bad) and the guy couldn't mount the fan.
 
You must log in or register to reply here.
Top