Thank you I will check them out.https://www.amazon.com/Brake-Shoe-Rear-MITSUBISHI-MB699079/dp/B00B8Z2I8S.
I bought some of these and they were identical to the old ones on my '93. There's a little chart on that link that shows they fit P25 and P35 vans.
Also:
L300 L400 Brake Shoe (NiBK) – Good Karrma Delica Parts USA
OEM or OEM Equivalent Japanese Made Brake Shoes for your Delica L300 or L400 Delica L300 Brake Shoes Delica L400 Brake Shoesdelicapartsusa.com
You'll notice the OEM numbers on those two links are not the same. Not sure what the difference is, so check the EPC diagrams for your particular van. DelicapartUSA has several brake components, and another, more expensive set of shoes also.
Braking System – Good Karrma Delica Parts USA
delicapartsusa.com
Yes i will thx.It might be worth keeping your old shoes... getting them relined costs about the same as new in most cases. And at some point it may become the most viable option.
Did they say they have them in stock? If not, they are going to try to order them from Japan and will probably come back with "unavailable" in a week or two.FYI i got the brake shoes from https://www.mitsubishipartsnow.com/oem-parts/mitsubishi-shoe-set-rear-brake-mr178823 I called the Mitsubishi dealer gave them the part # from Megazip they told me i can order it directly.
I ordered it on line, I should get it tomm. If I don’t I will look at the after market part. ThxDid they say they have them in stock? If not, they are going to try to order them from Japan and will probably come back with "unavailable" in a week or two.
But MR178823 crosses to the 1996-2005 Mighty Max (L200/L400), and aftermarket shoes are readily available.
Just am FYI, that last link doesn't seem to resolve.Did they say they have them in stock? If not, they are going to try to order them from Japan and will probably come back with "unavailable" in a week or two.
But MR178823 crosses to the 1996-2005 Mighty Max (L200/L400), and aftermarket shoes are readily available.
Fixed it... BTW, these are not correct fitment for the L300 Van/Wagon. They fit the L300 truck (JB500) that Nulla has.Just am FYI, that last link doesn't seem to resolve.
That pic is for the rotor... and it does seem to be correct.I looked at the manual looking for the front rotor thickness specs is this correct? I am not sure if they are talking about the pads or the rotor thickness. See picture… The brake pads are suppose to arrive tomm by 8pm. thx
Ok thx.That pic is for the rotor... and it does seem to be correct.
If MR389546 are specced for your van, then maybe these are what you need:
Amazon.com: Mr389546 - Front (Disc Brake) Pad Kit For Mitsubishi - Febest : Automotive
Buy Mr389546 - Front (Disc Brake) Pad Kit For Mitsubishi - Febest: Brake Pads - Amazon.com ✓ FREE DELIVERY possible on eligible purchaseswww.amazon.com
The Napa might be correct but Amazone and the o’reilly are too big. I will look into the Napa. I also called karr automotive the other contact you gave me they said they have it and can overnight it tomm. Napa website say They have I can pick it up. I just need to make sure it is the correct one.ThxEPC says OEM part MR389526 fits my '93.
I Installed NAPA SS-7241-X awhile back and they work well and are a perfect fit for my front calipers.
My notes say O'reilly D349 might also work, but I haven't tried them or done any cross referencing to check.
Where did yo get those part numbers from? I get MR389526 for both the L300 and the Truck (L039G/YHND)... crosses to late 80's Montero.
I got the part #s from megazip. My pads are 139mm long we where looking at the Montero earlier i believe they where 149mm long. I will check it again tomm, I will also check Napa.BTW the rear pads where correct they are now installed.thxWhere did yo get those part numbers from? I get MR389526 for both the L300 and the Truck (L039G/YHND)... crosses to late 80's Montero.