DustAngel's latest activity

Porterfield Ap530 Porterfield Ap567 These part numbers can be cross referenced to work with L400. They are 1995 montero LS Rear rotors...

Hopefully someone here has a parts delica that can provide you with one

Maybe there is one like it from a montero or other import vehicle that can be modified to work? I wouldn’t trust the solder on a worn coil

Appears to be the rear blower motor resistor

Anyone have a way to 3D print or replicate the trim on the rear mirror? Mine has disintegrated and I’m sure yours will too

I finally got around to making and installing the curtains based on this thread (no pun intended??). I picked up some beige blackout...

Loosen the jam nut a couple of threads and the center coupler should adjust

And with a little bit more than "Nevermind, figured it out, you wouldn't believe what it was. ok bye"

Thank you for updating your findings

Got any pics of the fan rubbing marks? Do any of the pulleys wobble? If belts are good, proper tension when reinstalling most important

Remove the idler pulley and inspect bearing by hand, if you are just checking it while loose, you could be feeling the through bolt...

Yes, you don’t want to compromise the design, on a different vehicle years ago I ended up with some custom rear tie rod ends that did...

2wd as opposed to 4wd? I would use the correct ones unless you can make these work. Good news is since the new ones are longer you will...

If a diesel starts with help from starting fluid (be careful as not a good idea to using starter fluid!!!) the starting fluid increases...