NussBus
Member
Recently the van has been starting hard really hard or not at all. I noticed a leak from the top of my fuel filter housing. It seems to be leaking from under the priming plunger so I suppose that needs to be replaced. Is there an O-ring that I can just replace?
I was finally able to get underneath it today and noticed diesel leaking from what appears to be the bottom sides (both) of the injection pump. The image below is NOT mine but I found it on the UK forum and it clearly points out where my leak is coming from. Does anyone here have any experience replacing the O-Rings behind those plates? Is it a tough job? Can it be done with the pump still installed or does it need to be removed from the engine first?
Thanks for your input!
I was finally able to get underneath it today and noticed diesel leaking from what appears to be the bottom sides (both) of the injection pump. The image below is NOT mine but I found it on the UK forum and it clearly points out where my leak is coming from. Does anyone here have any experience replacing the O-Rings behind those plates? Is it a tough job? Can it be done with the pump still installed or does it need to be removed from the engine first?
Thanks for your input!