Center Rear View Mirror Fix

Kyre

Active Member
My mirror just started flopping around and wouldn't stay still. I saw this thread and noticed I'm not the only one. I liked @sk66 idea of heating the plastic to pop the mirror off but my wife would kill me if I put plastic in the oven.

I ended up using a heat gun to warm the plastic just enough to put some trim tools on one side, then heated a little more to pop the mirror out.

Inside I noticed the little plastic flip/high beam mechanism was broken but I was still able to simply tighten the screw and now no more flop! Could probably add some thread lock to that screw too.

I then heated the plastic again and the mirror popped right back in.

Took 15-20 min tops.
 

Attachments

  • 1.JPG
    1.JPG
    65.3 KB · Views: 60
  • 2.JPG
    2.JPG
    64.1 KB · Views: 61
  • 3.JPG
    3.JPG
    55.6 KB · Views: 65
  • 4.JPG
    4.JPG
    45.4 KB · Views: 62
  • 5.jpg
    5.jpg
    85.1 KB · Views: 59
In an even lower budget option, a hair dryer worked well! I used a mixture of my hands (wasn’t that hot) and bicycle tire levers. I barely had to heat it up to pop it back in.
 
Top