pnw87delica
New Member
RHS #MB581261 and LHS #MB581258... ~ $75 ea from Amayama.
Hey sk66,
thanks for the part numbers. just to be 100% those are just the rubber bushing/pillows correct?
RHS #MB581261 and LHS #MB581258... ~ $75 ea from Amayama.
Yes, the complete assembly, not just the bushing. You can type the part numbers into google to see reference images for verification.Hey sk66,
thanks for the part numbers. just to be 100% those are just the rubber bushing/pillows correct?
Yes, the complete assembly, not just the bushing. You can type the part numbers into google to see reference images for verification.
Hey sk66,
thanks for the part numbers. just to be 100% those are just the rubber bushing/pillows correct?
Looks like the parts I noted are the lower mounts that attach to the transmission body.Keep hearing more details as I go down this rabbit hole. The cross brace I called out earlier (21811) includes the two bushings and mounts that connect to the chasis. These used to be sold individually, but those parts have been discontinued and are now only included as a package.
It's pretty easy to get, about $300 US shipped for the whole assembly, but you'll have standard bushings again.
Still working on this Russian site. I've been able to find a few other sites that carry the parts, and was able to get a friend who has an Aunt in Russia to act as a surrogate. Because for $120 for all four bushings in poly (two on the body, two on the transmission) I'd MUCH rather go down that route.
Hey sk66,
thanks for the part numbers. just to be 100% those are just the rubber bushing/pillows correct?
I got these for mine and they fit nicely. I also got them from Amayama and I think the shipping added around $60RHS #MB581261 and LHS #MB581258... ~ $75 ea from Amayama.
Thanks Doc,
Those are the mounts with bushings already pressed. The Russian site seems to be selling a Polyurethane version of the bushing you have to press yourself, wouldn't you say?
any info on aftermarket replacement bulbs for headlights? couldnt find anything definite. would like to brighten up, maybe LED
I have a different headlight unit though. wonder if it would still work or would need a bracket made. yours look cleanThe prior owner of mine put in LED replacement headlights
I believe they're just generic ones, something like these
I have a different headlight unit though. wonder if it would still work or would need a bracket made. yours look clean
Some good and also confusing discussion about this topic over the boarder in CA. I think this is the thread your're after.Ah yours is the post facelift, my apologies. There are always HID kits that can be found pretty cheap. Will take a little more wiring with the inverters etc.
Does anyone know the PN for a right-rear brake drum adjuster? Mine sheared off! I need it ASAP, too. Is it the same as the Gen 1 Montero / Dodge Raider by chance?