d4bf

  1. jonsvibe

    D4BF/ 4D56 Pilot Bearing

    Hey all. Emergency here. I was swapping out my clutch and flywheel on my 4D56 with a D4BF kit. The D4BF flywheel has a larger pilot bearing which I didn’t realize until everything was pulled. Does anyone have a part number for a replacement that would be compatible with the larger OD of the D4BF...
  2. paul

    L300 New Engine Replacement Hyundai D4BF Thread (Current 2022-2023)

    Hey Guys, after an over one year delay, our next Hyundai D4BF order has left the factory for packing! We are told that the boat should leave July 4th with our FULL 40' CONTAINER OF ENGINES. That's right, we went absolutely insane and bought 50 Hyundai D4BFs. From our frustrations the last few...
  3. C

    EGT sensor on D4BF

    So I recently had a Hyundai D4BF put into my L300 and it's running great. The previous owner had installed an EGT sensor but the mechanic that put the new engine in didn't tap it into the new engine and told me that with normal operation I shouldn't have to worry about EGT temps and that normal...
  4. L

    D4BF 1.6L l300 4x4 ?

    Wondering if anyone has any clue if I could use the 1.6L Hyundai D4BF td from the i30 in my dead delica ?
  5. Harebear

    I’m dire need of a 4D56

    I ended up throwing a rod on my way back home on a cross country trip. As it stands she’s stuck in a shop in Nebraska. I thought about upgrading with the newer Huyndai engine. However the mechanics are hesitant on installing the same thing but a little different (even though I explained it’s the...
  6. f1del

    D4BF - turbo vacuum lines

    hi , i have a D4DF and im not sure about my vacuum lines, my turbo doesnt seem to be boosting and the wastegate isnt opening, but one doubt remains, which vacuum line goes to the top of the fuel pump ? is that the boost compensator? - i swapped from a D4BH to a D4BF which i got around 6 months...
  7. vanman

    Hyundai D4BF - West Coast

    Anyone currently (or know anyone that is) importing a batch of Hyundai D4BF engines? Just found out that my turbo and cylinder 3 are shot so I'll likely need an engine rebuild. At this point, the Hyundai swap is sounding more appealing than rebuilding the 26-year-old original. Any tips, leads...
  8. Q

    Replacement Engine

    Hello everyone! My 1991 L300 4D56 was overheating for some reason, so I took it to the Delica mechanic in town sadly to find out that exhaust fumes were found in the cooling system. Most likely the reason is due to a blown head gasket or possibly a cracked cylinder head. The repair is estimated...
  9. Growlerbearnz

    Hyundai D4BF info and installation guide.

    Thinking of fitting a brand new Hyundai D4BF to your Delica? No? Take a look at these photos and you'll change your mind: SO. SHINY. The D4BF is a 4D56, made under license. It even says 4D56 on the engine block. It says "Hyundai" on a bunch of other parts, but I don't mind. Hyundai make a...
Top